Scara V4

from $19,500.00

Product Details

The 3D Potterbot Scara V4 is our largest model for 3D ceramic and paste printing with our extruder system.

4000ml Extruders will have a reduced maximum speed due to kinetic energy changes that can occur while 3D printing.

Please contact us to purchase this item. We only accept cash, check, or wire transfer for this item.

Extruder:

Product Details

The 3D Potterbot Scara V4 is our largest model for 3D ceramic and paste printing with our extruder system.

4000ml Extruders will have a reduced maximum speed due to kinetic energy changes that can occur while 3D printing.

Please contact us to purchase this item. We only accept cash, check, or wire transfer for this item.

The Scara V4 is the first viable large-scale ceramic 3D printer using real clay. The advanced design and substantial construction can take on board loads like the 3D Potter 4000ml clay extruder.

What's included:

1. Scara v4

2. Closed loop stepper on X, Y, Z, extruder

3. Extruder size of your choice.

4. 5 anodized aluminum nozzles (standard sizes: 3, 4, 5, 6, and 8mm when extruder is purchased)

5. Parts Box: Alan key set, grease, Acme driver tool, tie wraps, extra screws

6. Power Supply

Specifications

Printing Envelope:
X/Y- 72" Diameter Circle (1829mm)
Z- 45” (1143mm)

Minimum Printing Envelope:
X/Y- 22" Diameter Circle (558mm)

Printer size:
W-34” L-18” H-44”
Normal operational space needed: W-40” L-36” H-~70”
Maximum operational space needed: W-88” L-88” H-~84”
Height to the top of the extruder fully extended is H~84” (2134mm)
Weight with extruder: 90 lbs. (41kg)

Average speed: 1.2’’ to 3.9’’/s (30 to 100 mm/s)
Power Supply: Output - 24V ~15 amps, Input - 110-220V, 50-60 Hertz.
Power consumption: 24V ~8 amps, ~192 Watt
Main controller board running Duet3D with Atmel SAM4E8E: 120MHz ARM Cortex-M4

Full control through web interface, no apps or software installation. Non-WiFi versions are available, please contact us if you would like this type of connection (Ethernet connection).