Click on alinkbelow tobrowse our Ceramic Supplies.
Sculpture Tools and Supplies
. . .
are now available through
Shellspen International, Inc.
$ 60.00 minimum,
including shipping !!!!!
for any
assortment of products
from our
sculpture supply section, sent to one shipping address.
Ceramic Tool Sets
Clean Up Tools - Set of 3 ToolsItem No.245AZ
These tools have 2 versatile working ends
mounted on lacquered hardwood handles secured
with brass ferrules and waterproof glue. Set of
3 tools. Made in U.S.A.
$15.00
Tulons - Set of 4 Tools
Item No. 246AZ Natural finished birch wood
tools for burnishing and shaping clay.
Approximate length of each tool - 6"..
$5.00
Ceramic Trimming Tool Set
Item No. CTT7-WB This set includes 7 trimming
and cutting tools with wooden handles and
sharpened wire cutting ends of different shapes.
Tools range from 5 1/2" to 6 1/2" in length.
Comes in a plastic pouch. $10.00
Wire Ribbon Ceramic Tool Set
Item No. WCT7-WB This set includes 7 tools
with wooden handles and sharpened wire cutting
ends of different shapes. Approximate length of
each tool is 7 1/2". Comes in a plastic pouch.
$10.00
Wooden Potters Ribs - Set of 2 Ribs
Item No. 118WEB These hardwood ribs, No. 116,
are as essential to a potter as a trimming tool
or needle tool. Approximate length of the 116 -
4 1/2"; approximate width on widest side - 2".
One side of the 118 is partially serrated. Its
approximate length - 7 1/2"; approximate width
on widest side - 1".
$7.00
Double Wire End Tools - Set of 2 Tools
Item No. 700WEB The 701 and 711 double wire
end tools are used by ceramists and potters to
trim and foot pottery. Both have lacquered
handles, brass ferrules, and watch spring steel
cutting edges. Made with waterproof glue. Length
- 7 1/2". Made in U.S.A.
$14.00
Ceramic Tool Set Item No.
CTSWEB The Ceramic Tool Set includes: The
toggle clay cutter is a 16" piece of cutting
wire attached to wooden handles used to cut
sections of clay in the wedging process and for
removing thrown pots from the potters wheel. The
4" Mediterranean elephant ear sponge is long
lasting and durable. Its shape allows it to be
held comfortably in the hand while throwing
pots. Its strength and shape help to absorb
excess water applied when bringing up the walls
of the pot. The hardwood rib, No. 116, is
essential to a potter as a trimming tool or
needle tool. Approximate length - 4 1/2";
approximate width on widest side - 2". The
hardwood rib, No. 118, is essential to a potter
as a trimming tool or needle tool. One side is
partially serrated. Approximate length - 7 1/2";
approximate width on widest side - 1". The
needle tool is a universal trimming and cutting
tool with an aluminum handle and fine point
cutting needle and curved handle support.
Approximate length - 6 1/4".
$18.00
Loop Tools - Set of 2 Tools
Item No. PCWEB The PC1 (Pear Corer) and PC9 (Vee
Point) are handmade tools used by both a potter
working on a wheel or a sculptor working in
clay. Well-balanced handles offer a good grip.
The loops are made form high carbon steel. The
edges are ground sharp. Made in U.S.A. $16.00
